subject
Engineering, 25.07.2020 19:01 achasengnou792

1) Mathematically write 2nd Law (for all type of systems) using 3 symbols2) Entropy, s , is an intensive thermodynamic property T or F 3) Eliminate Sgen to minimize Wout of power cycle and maximize Win of heat pump T or F 4) For a specified inlet state, exit pressure, and mass flow rate, the power input to a compressor operating at steady state is less than what would be required if the compression occurred isentropically. T or F 5) For a specified inlet state, exit pressure, and mass flow rate, the power developed by a turbine operating at steady state is more than if the expansion occurred isentropically. T or F 6) The Carnot cycle analyzed in problem 6.169 produces entropy, Sgen > 0 T or F 7) The boiler and condenser in problem 6.169 produces entropy, Sgen > 0 T or F 8) The mixing of two streams of water at different temperature in a mixing tee (i. e. kitchen faucet) is an irreversible process, and produces entropy, Sgen > 0 T or F 9) Entropy generation, Sgen , is an intensive thermodynamic property T or F

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
question
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
question
Engineering, 04.07.2019 19:20
To save energy, the air supply to a 2000 ft office has been shut off overnight and the room temperature has dropped to 40°f. in the morning, the thermostat is reset to 70°f and warm air at 120 f begins to flov in at 200ft'/min. the air is well mixed within the room, and an equal mass flow of air at room temperature (changing with time) is withdrawn through a return duct. the air pressure is nearly 1 atm everywhere. ignoring heat transfer with the surroundings and kinetic and potential energy effects, estimate how long it takes for the room temperature to reach 70°f. plot the room temperature as a function of time.
Answers: 1
question
Engineering, 04.07.2019 19:20
Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.
Answers: 1
You know the right answer?
1) Mathematically write 2nd Law (for all type of systems) using 3 symbols2) Entropy, s , is an inten...
Questions
Questions on the website: 13722360