subject
Engineering, 25.07.2020 18:01 onlinebby7878

An alloy that has a plane strain fracture toughness of 45 MPaLaTeX: \sqrt{m}m is used to fabricate a structural component. Experiments revealed that this component fails at a stress of 300 MPa when the maximum length of a surface crack is 0.95 mm. For the same component, find the maximum allowable surface crack length (in mm) without fracture if it is exposed to a stress of 300 MPa and made from another alloy with a plane-strain fracture toughness of 57.7 MPaLaTeX: \sqrt{m}m

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 19:20
Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.
Answers: 2
question
Engineering, 04.07.2019 19:20
Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90Ā° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.
Answers: 1
question
Engineering, 06.07.2019 04:30
Asharp-edged orifice is placed in a 10-in-diameter pipe carrying ammonia. if the volume flow rate is 25 gal/min, calculate the deflection of a water manometer (a) if the orifice diameter is 1.0 in and (b) if the orifice diameter is 7.0 in. the ammonia has a specific gravity of 0.83 and a dynamic viscosity of 2.5 x 10-6 lb s/t2
Answers: 3
question
Engineering, 06.07.2019 04:30
Acylindrical tank is capable of storing 20,000 foot-pounds [ft ibf] of energy for use in your roommate's 2006 subaru wrx. the tank contains nitrous oxide, n20, which you may assume is an ideal gas and has a molecular weight of 44 grams per mole 1g/mol. the tank fits in a space in the trunk that is no wider than 6 inches fin] and no longer than 10 inches [inj, and you may assume the warm clemson weather is keeping the temperature of the tank inside the trunk at a constant 100 degrees fahrenheit [Ā°fl. what is the weight of the nitrous oxide occupying the tank when full, in units of dynes
Answers: 1
You know the right answer?
An alloy that has a plane strain fracture toughness of 45 MPaLaTeX: \sqrt{m}m is used to fabricate a...
Questions
question
Mathematics, 18.03.2021 06:20
Questions on the website: 13722360