Engineering, 18.07.2020 18:01 kamila20394
The following are the impulse responses of discrete-time LTI systems. Determine whether each system is causal and/or stable. Justify your answer
a. h[n]=(1/5)nu[n]h[n]=(1/5)^n u[n]
b. h[n]=(0.8)nu[n+2]
c. h[n]=(½)nu[−n]
d. h[n]=(5)nu[3−n]
Answers: 3
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
The following are the impulse responses of discrete-time LTI systems. Determine whether each system...
Mathematics, 16.07.2019 20:20
English, 16.07.2019 20:20
Mathematics, 16.07.2019 20:20
Mathematics, 16.07.2019 20:20
Mathematics, 16.07.2019 20:20