subject
Engineering, 15.07.2020 01:01 zitterkoph

Engineers Sophia and Giles are modifying a process to make concentrated apple cider starting from a slurry - a slurry is a mixture of solids in a liquid that can normally be pumped. A slurry made with apples having a mass fraction of 0.422 and the balance water is fed to a juicer at a rate of 27.3 kg/min. Seventy percent of the apples entering the juicer leave as part of the solid waste stream (containing apples and water). The primary product from the juicer is cider (32.9 wt% apples and 67.1 wt% water). The cider is sent to an evaporator where concentrate - apple concentration increases to 49.1 wt% - is produced along with a stream of pure water that is recycled. The pure water stream leaving the evaporator is mixed with fresh water entering the process. The combined water stream mixes with pristine apples entering the process to create the slurry. Determine the following three unknowns: 1. Mass fraction of apple in the solid waste
2. Total flow rate of the concentrate (kg/min)
3. Flow rate of pure water entering the overall system (kg/min)

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
question
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
question
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
question
Engineering, 04.07.2019 18:10
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
You know the right answer?
Engineers Sophia and Giles are modifying a process to make concentrated apple cider starting from a...
Questions
question
Mathematics, 14.06.2021 20:40
question
History, 14.06.2021 20:40
question
Mathematics, 14.06.2021 20:40
question
Computers and Technology, 14.06.2021 20:40
Questions on the website: 13722363