Engineering, 13.07.2020 23:01 northan
A 1.7 cm thick bar of soap is floating in water, with 1.1 cm of the bar underwater. Bath oil with a density of 890.0 kg/m{eq}^3 {/eq} is added and floats on top of the water. How high on the side of the bar will the oil reach when the soap is floating in only the oil?
Answers: 1
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 18:20
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
A 1.7 cm thick bar of soap is floating in water, with 1.1 cm of the bar underwater. Bath oil with a...
Mathematics, 16.09.2020 19:01
Mathematics, 16.09.2020 19:01
Mathematics, 16.09.2020 19:01
Social Studies, 16.09.2020 19:01
Mathematics, 16.09.2020 19:01
Mathematics, 16.09.2020 19:01
Mathematics, 16.09.2020 19:01
Social Studies, 16.09.2020 19:01
Chemistry, 16.09.2020 19:01
Mathematics, 16.09.2020 19:01
Mathematics, 16.09.2020 19:01
Mathematics, 16.09.2020 19:01
Mathematics, 16.09.2020 19:01
Mathematics, 16.09.2020 19:01
Mathematics, 16.09.2020 19:01
Mathematics, 16.09.2020 19:01
Mathematics, 16.09.2020 19:01
Mathematics, 16.09.2020 19:01
Mathematics, 16.09.2020 19:01
Mathematics, 16.09.2020 19:01