subject
Engineering, 07.07.2020 19:01 yclark98563p5z2gt

A high molecular weight hydrocarbon gas A is fed continuously into a heated mixed flow reactor (0.1liter) where it is thermally cracked into lower molecular weight materials collectively called R as the reaction stoichiometry A 5R. Find the space velocity if molar feed rate was 300millimol/ hr and the feed concentration was 100millimol / lit.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
question
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
A high molecular weight hydrocarbon gas A is fed continuously into a heated mixed flow reactor (0.1l...
Questions
question
Mathematics, 12.03.2021 22:10
question
Mathematics, 12.03.2021 22:10
Questions on the website: 13722362