subject
Engineering, 30.06.2020 15:01 jaimevalenzuela60

A mixture of ethyl alcohol and water with equimolar concentration is to be distilled in a seven plates column as a batch distillation with a reboiler at atmospheric pressure, if we neglect the residue liquid in condenser and reboiler, calculate :- A) State-1 (Constant XD).
The amount of distilled (D) and the a mount of heat required for ( 100 Kmole of Feed ) to get xD = 80 mole% , if R (reflux ratio must be increased till it reach=6.0 ) .
B) State-2 (Constant reflux ratio R).
The average value of xD (top product) & the a mount of heat if the concentration in the boiler must not less than 10 mole% ethanol if R is constant at = 4.0.
VLE for Ethanol-water are given in curve below:-

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
question
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
question
Engineering, 04.07.2019 18:10
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
A mixture of ethyl alcohol and water with equimolar concentration is to be distilled in a seven plat...
Questions
Questions on the website: 13722361