When an object is made of the plastic polyester (PET), it uses antimony as a catalyst. After production, antimony can leach into food and drink stored in PET containers. Usually, if stored correctly for a short amount of time, the amount of antimony found in liquids is well below the safety limits. However, there have been reports of as much as 44.7 micrograms per liter [µg/L] of antimony found in fruit juice concentrates. How much antimony, in units of moles [mol], could be found in one gallon [gal] of fruit juice concentrate at this level of contamination? The molecular mass of antimony is 121.76 grams per mole [g/mol].

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

The higher the astm grain size number, the finer the gran is. a)-true b)-false