Suppose a conventional water bottle cap is made with a single-start thread of 0.125 in pitch. Further suppose that the lid must be rotated 2.75 times to completely close the bottle, requiring the typical use to re-clutch the lid approximately 4 times to screw the lid shut. If the lid is re-designed with exactly the same pitch, but three starts, rather than one, how many times must the lid be rotated to completely close the bottle

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k