Engineering, 20.06.2020 00:57 jimena15
A cylindrical bar of metal having a diameter of 20.2 mm and a length of 209 mm is deformed elastically in tension with a force of 50500 N. Given that the elastic modulus and Poisson's ratio of the metal are 65.5 GPa and 0.33, respectively, determine the following: (a) The amount by which this specimen will elongate in the direction of the applied stress. (b) The change in diameter of the specimen. Indicate an increase in diameter with a positive number and a decrease with a negative number.
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
A cylindrical bar of metal having a diameter of 20.2 mm and a length of 209 mm is deformed elastical...
Mathematics, 08.04.2021 21:20
Mathematics, 08.04.2021 21:20
Mathematics, 08.04.2021 21:20
Chemistry, 08.04.2021 21:20
Geography, 08.04.2021 21:20
Social Studies, 08.04.2021 21:20
Social Studies, 08.04.2021 21:20
Chemistry, 08.04.2021 21:20
Mathematics, 08.04.2021 21:20
Mathematics, 08.04.2021 21:20
Mathematics, 08.04.2021 21:20