Engineering, 18.06.2020 18:57 ashiteru123
The cross-braces (labeled 1 and 2) in the truss are cables that can support only tension and not compression. They slip past each other where they cross; i. e. they are not pinned together there.
(a) Please indicate which of the two cross-braces is in tension (the other will be slack, with zero force), and calculate its tension.
(b) Now suppose that the cross-braces are replaced with regular rigid struts that can support both tension and compression. Would the structure now be statically determinate
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
Engineering, 04.07.2019 19:10
Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false
Answers: 3
You know the right answer?
The cross-braces (labeled 1 and 2) in the truss are cables that can support only tension and not com...
Questions
Mathematics, 06.04.2021 04:40
Mathematics, 06.04.2021 04:40
English, 06.04.2021 04:40
