Engineering, 18.06.2020 00:57 rainboworld3994

A laser-materials-processing apparatus encloses a sam- ple in the form of a disk of diameter D = 25 mm and thickness w^-1 mm. The sample has a diffuse surface for which the spectral distribution of the emissivity, 6(A), is prescribed. To reduce oxidation, an inert gas stream of temperature T[infinity]= 500K and convection coefficient h=50W/m^2.K flows over the sample upper and lower surfaces. The apparatus enclosure is large, with isothermal walls at Tenc= 300 K. To maintain the sample at a suitable operating temperature of Ts=2000 K, a collimated laser beam with an operating wavelength of Î» = 0.5 Î¼m irradiates its upper surface. a. Determine the total emissivity Îµ of the sample.
b. Determine the total absorptivity Î± of the sample for irradiation from the enclosure walls.
c. Perform an energy balance on the sample and determine the laser irradiation, Giaser, requi maintain the sample at Ts= 2000 K.
d. Consider a cool-down process, when the laser and the inert gas flow are deactivated. Sketch the total emissivity as a function of the sample temperature, Ts(t), during the process. Identify key features, including the emissivity for the final condition

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

Answer

Engineering, 04.07.2019 18:20

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?

Answers: 3

Answer

You know the right answer?

A laser-materials-processing apparatus encloses a sam- ple in the form of a disk of diameter D = 25...

Questions