subject
Engineering, 13.06.2020 22:57 ymuttmutt3890

Write a QBasic program to sort aphetically the number of student names, each student name has first and last name like "Ahmed Yousef". The program should print the names before and after sorting. Also, the program should use "eod" as the last record in the file. The program should consider the upper and lower case for the names. 1. The first sorting should be based on the first name "Ahmed". Note that, the first names of two students may have the same first character and in this case, the sorting should be considered based on the second character of the first names of two students. 2. The second sorting should be based on the last name "Yousef". Note that, the last names of two students may have the same first character and in this case, the sorting should be considered based on the second character of the last names of two students

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 19:10
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
question
Engineering, 04.07.2019 19:10
The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]
Answers: 3
You know the right answer?
Write a QBasic program to sort aphetically the number of student names, each student name has first...
Questions
question
Biology, 24.10.2020 02:30
Questions on the website: 13722361