8) Three inductive loads, each of resistance 49 and reactance 9 Q are connected in delta. When connected to a 3-phase supply the loads consume 1.2 kW. Calculate
i. the power factor of the load,

ii. the phase current,

iii. the line current and

iv the supply voltage

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.

The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false