subject
Engineering, 12.06.2020 02:57 JojoSiwa901

C) Three AC voltages are as follows: ei= 80 sin wt volts;
e2 = 60 sin (wt + π/2) volts;
e3= 100 sin (wt-π/3) volts.
Find the resultant e of these three voltages and express it in the form
Em sin wt+-&).
When this resultant voltage is applied to a circuit consisting of a 10 resistor and a
capacitance of 17.3 2 reactance connected in series, find an expression for the
instantaneous value of the current flowing, expressed in the same form.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
question
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
question
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
You know the right answer?
C) Three AC voltages are as follows: ei= 80 sin wt volts;
e2 = 60 sin (wt + π/2) volts;
e...
Questions
question
Mathematics, 03.06.2021 20:30
question
Chemistry, 03.06.2021 20:30
question
Chemistry, 03.06.2021 20:30
Questions on the website: 13722367