A carrier signal with a frequency of 100 MHz, frequency by band limited information sign with 2 KHz modulating. Maximum frequency deviation of the FM sign (Δf) 25 KHz and information sign amplitude (Am) If it is 15.7 Volts;
a) Calculate the bandwidth of the FM sign?
b) The bandwidth of the FM signal is doubled and the frequency modulation constant is taken if kf = 10000
What can be said about the signal to noise ratio (SNR) of the signal, why?

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise