Engineering, 06.06.2020 23:02 kaziyahf2006
An angular-contact, inner ring rotating, 02-series ball bearing is required for an application in which the life requirement is 37 kh at 540 rev/min. The design radial load is 725 lbf. The application factor is 1.4. The reliability goal is 0.93. For a C10 value of 63.7 kN, what is the reliability using the design factor, force, speed, and desired life from part a? The reliability is:.
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
You know the right answer?
An angular-contact, inner ring rotating, 02-series ball bearing is required for an application in wh...
Questions
History, 20.01.2021 16:50
English, 20.01.2021 16:50
Mathematics, 20.01.2021 16:50
Mathematics, 20.01.2021 16:50
Advanced Placement (AP), 20.01.2021 16:50
Mathematics, 20.01.2021 16:50
English, 20.01.2021 16:50
Mathematics, 20.01.2021 16:50
