Engineering, 06.06.2020 18:58 mimithurmond03
A mass of 0.1 kg of helium fills a 0.2 m3 rigid vessel at 350 kPa. The vessel is heated until the pressure is 730 kPa. Calculate the temperature change of helium (in K) as a result of this heating. The gas constant of helium is R = 2.0769 kPa·m3/kg·K.
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
You know the right answer?
A mass of 0.1 kg of helium fills a 0.2 m3 rigid vessel at 350 kPa. The vessel is heated until the pr...
Questions
Mathematics, 31.07.2021 02:50
Mathematics, 31.07.2021 02:50
English, 31.07.2021 02:50
History, 31.07.2021 02:50
