Engineering, 06.06.2020 04:02 farrellandnandi
Q1) Design a concrete mixture proportions which will be used for offshore concrete platform. Norway is a world leader on offshore concrete platforms with 1a of the world’s 30 larger offshore concrete structures located on the Norwegian continental shelf. The first of these platforms where the Ekofisk Tank installed in 1974 and the last was Troll gravity based structure installed in 1996. The Sakhalin project is located in a harsh and artic environment where concrete structures have proven excellent characteristics with a minimum of maintenance. 80 mm slump value is required for the Sakhalin project. 28-days concrete characteristic strength is 2b MPa. It is required that no more than 1 test result in 100 will fall below the specified strength. The fine aggregate has a fineness modulus of 2.60 and Zone 3. For Coarse Aggregate (Uncrushed): SSD Bulk Specific Gravity: 2.65, Absorption Capacity: 2.b %, Total Moisture: 1.c % and Dry Rodded Unit Weight: 1345 kg/m3. For Fine Aggregate (Uncrushed): SSD Bulk Specific Gravity: 2.70, Total Moisture: 3.d % and Free Moisture: 2 %. Cement: Portland Composite Cement, Specific Gravity: 2.97. For 0.e5 m3 of concrete, binder amount is calculated as 120 kg (Use ACI Method of Mix Design) Note:(a is 8 b is 6 c is 1 d is 9 e is 9)
Answers: 1
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
Q1) Design a concrete mixture proportions which will be used for offshore concrete platform. Norway...
English, 17.09.2020 06:01
Mathematics, 17.09.2020 06:01
Mathematics, 17.09.2020 06:01
Physics, 17.09.2020 06:01
Mathematics, 17.09.2020 06:01
Mathematics, 17.09.2020 06:01
Mathematics, 17.09.2020 06:01
Mathematics, 17.09.2020 06:01
English, 17.09.2020 06:01
Biology, 17.09.2020 06:01
Mathematics, 17.09.2020 06:01
Business, 17.09.2020 06:01
Mathematics, 17.09.2020 06:01
Mathematics, 17.09.2020 06:01
Mathematics, 17.09.2020 06:01
Mathematics, 17.09.2020 06:01
Mathematics, 17.09.2020 06:01
Mathematics, 17.09.2020 06:01
Mathematics, 17.09.2020 06:01
English, 17.09.2020 06:01