Engineering, 02.06.2020 15:57 lilquongohard

A circular rod is attached to a wall. It has three gears (1, 2, 3).
Gear 1 is located D inches away from the wall.
Gear 2 is E inches away from Gear A.
Gear 3 is A + B inches away from Gear B.
The torque applied to Gear 1 is A kip-ft, Gear 2 is B kip-ft, Gear 3 is C kip-ft.
If the value of A, B,C is even the torque is positive, if odd the torque is negative.
The outdoor diameter is your largest number in centimeters. The inner diameter is your smallest number in centimeter. Make sure to convert to appropriate units.
The rod is made from Red Brass C83400 from the wall to Gear 1, Structural A-36 Steel from Gear 1 to Gear 2, and Magnesium Alloy Am 1004-T61 from Gear 2 to Gear 3.
a. Draw your diagram with clearly labeled distances, torques, etc.
b. Calculate the maximum shear stress for the three different materials.
c. How many degrees and in which direction does gear three turn in relation to the wall when all three torques are applied?

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

Answer

You know the right answer?

A circular rod is attached to a wall. It has three gears (1, 2, 3).
Gear 1 is located D inche...

Questions