Engineering, 28.05.2020 19:58 ErrorNameTaken505

An air-standard dual cycle has a compression ratio of 9.1 and displacement of Vd = 2.2 L. At the beginning of compression, p1 = 95 kPa, and T1 = 290 K. The heat addition is 4.25 kJ, with one quarter added at constant volume and the rest added at constant pressure. Determine: a) each of the unknown temperatures at the various states, in K. b) the net work of the cycle, in kJ. c) the power developed at 3000 cycles per minute, in kW. d) the thermal efficiency. e) the mean effective pressure, in kPa.

Answers: 3

Show answers

Answers

Answer from: christpress0

a) T₂ is 701.479 K

T₃ is 1226.05 K

T₄ is 2350.34 K

T₅ is 1260.56 K

b) The net work of the cycle in kJ is 2.28 kJ

c) The power developed is 114.2 kW

d) The thermal efficiency, $\eta _{dual}$ is 53.78%

e) The mean effective pressure is 1038.25 kPa

Explanation:

a) Here we have;

$\frac{T_{2}}{T_{1}}=\left (\frac{v_{1}}{v_{2}} \right )^{\gamma -1} = \left (r \right )^{\gamma -1} = \left (\frac{p_{2}}{p_{1}} \right )^{\frac{\gamma -1}{\gamma }}$

Where:

p₁ = Initial pressure = 95 kPa

p₂ = Final pressure =

T₁ = Initial temperature = 290 K

T₂ = Final temperature

v₁ = Initial volume

v₂ = Final volume

v_d = Displacement volume =

γ = Ratio of specific heats at constant pressure and constant volume cp/cv = 1.4 for air

r = Compression ratio = 9.1

Total heat added = 4.25 kJ

1/4 × Total heat added = $c_v \times (T_3 - T_2)$

3/4 × Total heat added = $c_p \times (T_4 - T_3)$

c_v = Specific heat at constant volume = 0.718×2.821× 10⁻³

c_p = Specific heat at constant pressure = 1.005×2.821× 10⁻³

v₁ - v₂ = 2.2 L

$\left \frac{v_{1}}{v_{2}} \right =r \right = 9.1$

v₁ = v₂·9.1

∴ 9.1·v₂ - v₂ = 2.2 L = 2.2 × 10⁻³ m³

8.1·v₂ = 2.2 × 10⁻³ m³

v₂ = 2.2 × 10⁻³ m³ ÷ 8.1 = 2.72 × 10⁻⁴ m³

v₁ = v₂×9.1 = 2.72 × 10⁻⁴ m³ × 9.1 = 2.47 × 10⁻³ m³

Plugging in the values, we have;

${T_{2}}= T_{1} \times \left (r \right )^{\gamma -1} = 290 \times 9.1^{1.4 - 1} = 701.479 \, K$

From;

$\left (\frac{p_{2}}{p_{1}} \right )^{\frac{\gamma -1}{\gamma }}= \left (r \right )^{\gamma -1}$ we have;

$p_{2} = p_{1}} \times \left (r \right )^{\gamma } = 95 \times \left (9.1 \right )^{1.4} = 2091.13 \ kPa$

1/4×4.25 = $0.718 \times 2.821 \times 10^{-3}\times (T_3 - 701.479)$

∴ T₃ = 1226.05 K

Also;

3/4 × Total heat added = $c_p \times (T_4 - T_3)$ gives;

3/4 × 4.25 = $1.005 \times 2.821 \times 10^{-3} \times (T_4 - 1226.05)$ gives;

T₄ = 2350.34 K

$\frac{T_{4}}{T_{5}}=\left (\frac{v_{5}}{v_{4}} \right )^{\gamma -1} = \left (\frac{r}{\rho } \right )^{\gamma -1}$

$\rho = \frac{T_4}{T_3} = \frac{2350.34}{1226.04} = 1.92$

$T_{5} = \frac{T_{4}}{\left (\frac{r}{\rho } \right )^{\gamma -1}}= \frac{2350.34 }{\left (\frac{9.1}{1.92 } \right )^{1.4-1}} =1260.56 \ K$

b) Heat rejected = $c_v \times (T_5 - T_1)$

$Therefore \ heat \ rejected = 0.718 \times 2.821 \times 10^{-3}\times (1260.56 - 290) = 1.966 kJ$

The net work done = Heat added - Heat rejected

∴ The net work done = 4.25 - 1.966 = 2.28 kJ

The net work of the cycle in kJ = 2.28 kJ

c) Power = Work done per each cycle × Number of cycles completed each second

Where we have 3000 cycles per minute, we have 3000/60 = 50 cycles per second

Hence, the power developed = 2.28 kJ/cycle × 50 cycle/second = 114.2 kW

$Thermal \ efficiency, \, \eta _{dual} = \frac{Work \ done}{Heat \ supplied} = \frac{2.28}{4.25} \times 100 = 53.74 \%$

The thermal efficiency, $\eta _{dual}$ = 53.78%

e) The mean effective pressure, p_m , is found as follows;

$p_m = \frac{W}{v_1 - v_2} =\frac{2.28}{2.2 \times 10^{-3}} = 1038.25 \ kPa$

The mean effective pressure = 1038.25 kPa.

Answer from: Quest

answer:

d. attempt to find the owner, then leave your information if you cannot find them.

explanation:

d. represents both (b) and (c).

more logical as well.

b and c are to complicated.

glad i could , give me a follow, so if you need with any other question, im here.

Answer from: Quest

answer:

explanation:

sbbdbdbdbdbdndjd

Another question on Engineering

Engineering, 03.07.2019 14:10

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

Answer

Engineering, 04.07.2019 18:20

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?

Answers: 3

Answer

You know the right answer?

An air-standard dual cycle has a compression ratio of 9.1 and displacement of Vd = 2.2 L. At the beg...

Questions