subject
Engineering, 19.05.2020 20:00 newjersey4015

In a single pass heat exchanger of an air conditioning system, warm air flows over a pipe carrying refrigerant R134a. The air, with a mass flow rate of 56.2 kg/min and at 100 kPa, needs to be cooled down from 37 °C to 27 °C. The refrigerant enters the tubes at 500 kPa with a quality of 20% and exits at 500 kPa, 20 °C. If there is no heat transfer between the heat exchanger and the surroundings, determine the amount of the refrigerant necessary to cool down the air, in kg/min.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
question
Engineering, 04.07.2019 19:10
The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object
Answers: 1
You know the right answer?
In a single pass heat exchanger of an air conditioning system, warm air flows over a pipe carrying r...
Questions
question
Mathematics, 10.10.2020 23:01
question
French, 10.10.2020 23:01
Questions on the website: 13722360