subject
Engineering, 09.05.2020 04:57 navjitdosanjh20

A sheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200C and is permitted to achieve a steady-state diffusion condition. The diffusion coefficient for nitrogen in steel at this temperature is 6 10-11m2/s, and the diffusion flux is found to be 1.2 10-7kg/m2-s. Also, it is known that the concentration ofnitrogen in the steel at the high-pressure surface is 4 kg/m3. How much nitrogen (in grams) will pass through the steel with the given conditions over a time period of 5 hours if the area of the exposed steel is 2 m²

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
question
Engineering, 04.07.2019 19:10
An electric kettle is made out of stainless steel, weighs two pounds (when empty) and is equipped with a heating element that consumes 2 kw of electricity. assuming that the water and the kettle are at the same uniform temperature at any moment of time, calculate the shortest possible time to bring 2 quarts of water from room temperature to the onset of boiling
Answers: 2
question
Engineering, 06.07.2019 02:30
Precipitation hardening can be achieved in many light alloys by a three-step heat treatment. what is carried out and what is the purpose at each step? why is such a treatment necessary based on the nucleation and growth theory of phase transformation. compare this treatment with tempering martensite for carbon steels (similarities and differences).
Answers: 1
You know the right answer?
A sheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200C and is permitted to a...
Questions
question
Mathematics, 14.04.2020 19:44
question
History, 14.04.2020 19:44
Questions on the website: 13722361