Engineering, 07.05.2020 03:59 drippyc1363

The semiconductor is a homogeneous, p-type material in thermal equilibrium for t ≤ 0. The excess minority carrier lifetime is 10^-6 ns. At t = 0, an external source is turned on which produces excess carriers uniformly at rate of g'=1020 cm^-3s^-1. At t = 210^-6 s , the external source is turned off.

(a) Derive the expression for the excess-electron concentration as a function of time for 0 ≤ t ≤[infinity].

(b) Determine the value of excess electron concentration at (i) t = 0, (ii) t = 210^-6 s , (iii) t = 3*10^-6 s and (iv) t = [infinity].

(c) Plot the excess electron concentration as a function of time.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis

Answers: 1

Answer

Engineering, 04.07.2019 19:10

10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.

Answers: 2

Answer

Engineering, 04.07.2019 19:10

What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.

Answers: 1

Answer

You know the right answer?

The semiconductor is a homogeneous, p-type material in thermal equilibrium for t ≤ 0. The excess min...

Questions