An ideal transformer steps down 120 V to 12 V and the 2630-turn secondary supplies 12 A of current through a load of 1 ohm. (a) Determine both the rms average current and the peak current in the primary. (b) What is the number of turns in the primary? (c) What is the ratio of power in the secondary to the power in the primary?

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.

Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.