subject
Engineering, 06.05.2020 05:39 Bloom247

Problem 1. (10 pts) a) (T / F) For the same pressure rise, a gas turbine compressor of a Brayton cycle requires much less power than the pump of a Rankine cycle. b) (T / F) The exhaust gases exiting from a gas turbine power plant in general cannot be used to generate additional power and must be discarded to the surrounding air. c) (T / F) For an ideal turbojet cycle, where the entire amount of thrust is provided by the turbojet, the back work ratio (BWR) is 1.0. d) (T / F) It is possible to cool moist air without changing its humidity ratio. e) (T / F) The Dalton model assumes that each component of a mixture can be treated as if it were alone at the same temperature and pressure of the overall mixture

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
Problem 1. (10 pts) a) (T / F) For the same pressure rise, a gas turbine compressor of a Brayton cyc...
Questions
question
Mathematics, 17.12.2020 03:20
question
Business, 17.12.2020 03:20
question
Mathematics, 17.12.2020 03:20
question
Mathematics, 17.12.2020 03:20
question
Mathematics, 17.12.2020 03:20
Questions on the website: 13722363