A cylindrical work part with D=2.5 in and h=2.5 in is upset forged in an open die to a height = 1.5 in. Coefficient of friction at the die–work interface = 0.10. The work material has a flow curve defined by: K= 40,000 lb/in2 and n = 0.15. Yield strength = 15,750 lb/in2. Determine the instantaneous force in the operation (a) just as the yield point is reached (yield at strain = 0.002), (b) at height h = 2.3 in, (c) h = 2.1 in, (d) h = 1.9 in, (e) h = 1.7 in, and (f) h = 1.5 in

What precautions should you take to prevent injuries when dealing with heavy loads?

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.