Engineering, 05.05.2020 23:26 natalie857123
1. A cylindrical work bar with 15 mm in diameter and 150 mm length is chucked in an engine lathe and supported at the opposite end using a live center. A 125 mm portion of the length is to be turned to a diameter of 14 mm one pass at a speed of 150 m/min. The metal removal rate should be 125 cm3/min. Determine (a) the required depth of cut, (b) the required feed, and (c) the cutting time.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
You know the right answer?
1. A cylindrical work bar with 15 mm in diameter and 150 mm length is chucked in an engine lathe and...
Questions
Mathematics, 10.11.2020 01:00
Computers and Technology, 10.11.2020 01:00
Mathematics, 10.11.2020 01:00
Mathematics, 10.11.2020 01:00
Mathematics, 10.11.2020 01:00
Mathematics, 10.11.2020 01:00
Mathematics, 10.11.2020 01:00
Chemistry, 10.11.2020 01:00
History, 10.11.2020 01:00
Arts, 10.11.2020 01:00
History, 10.11.2020 01:00
