Engineering, 05.05.2020 20:45 jdkrisdaimcc11
A cylindrical rod of brass originally 10.2 mm (0.40 in.) in diameter is to be cold worked by drawing; the circular cross section will be maintained during deformation. A cold-worked yield strength in excess of 380 MPa (55,000 psi) and a ductility of at least 15%EL are desired. Furthermore, the final diameter must be 7.6 mm (0.30 in.). Explain how this may be accomplished.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Engineering, 04.07.2019 18:20
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
Engineering, 05.07.2019 19:10
Tech a says never use a water hose to clean up dust after a repair. tech b says never use a floor scrubber to clean up dust after repairs. who is correct?
Answers: 1
You know the right answer?
A cylindrical rod of brass originally 10.2 mm (0.40 in.) in diameter is to be cold worked by drawing...
Questions
Physics, 12.04.2020 10:21
Mathematics, 12.04.2020 10:21
Arts, 12.04.2020 10:24
Social Studies, 12.04.2020 10:24
Social Studies, 12.04.2020 10:30
Business, 12.04.2020 10:31
Mathematics, 12.04.2020 10:32
English, 12.04.2020 10:32
History, 12.04.2020 10:32
English, 12.04.2020 10:32
English, 12.04.2020 10:32
Mathematics, 12.04.2020 10:33
