Engineering, 05.05.2020 18:44 devenybates
An inductor is connected to a voltage source and it is found that it has a time constant, t. When a 10-ohm resistor is placed in series with the inductor, the time constant becomes t/2. A pure inductance of 30 mH is placed in series with the original inductor and the 10-ohm resistor, the time constant is t. What are the values of the original inductors (a) inductance, (b) internal resistance
Answers: 1
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Engineering, 04.07.2019 19:10
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
An inductor is connected to a voltage source and it is found that it has a time constant, t. When a...
Mathematics, 18.12.2019 19:31
History, 18.12.2019 19:31
English, 18.12.2019 19:31
Chemistry, 18.12.2019 19:31