Engineering, 05.05.2020 18:37 eternity88091

The table shows the relationship between the masses of two objects, the distance between the two objects, and the gravitational force between the objects.

A 4-column table with 5 rows. The first column labeled Mass of Object 1 (kilograms) has entries 1, 2, 2, 3, 9.
The second column labeled Mass of Object 2 (kilograms) has entries 1, 1, 2, 3, 3.
The third column labeled Distance between Objects 1 and 2 (meters) has entries 1, 1, 2, 1, 3.
The fourth column labeled Gravitational Force Objects 1 and 2 (Newtons) has entries 1 G, 2 G, 1 G, 9 G, 3G.

Which conclusion is supported by the data in the table?

An increase in the mass of an object causes the same decrease in the gravitational force.

An increase in the distance between the objects causes the same decrease in the gravitational force.

An increase in the distance between the objects causes a greater change in the gravitational force than the same increase in mass.

An increase in the mass causes a greater change in the gravitational force than the same increase in the distance between the objects.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

Answer

Engineering, 03.07.2019 15:10

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?

Answers: 1

Answer

You know the right answer?

The table shows the relationship between the masses of two objects, the distance between the two obj...

Questions