Engineering, 05.05.2020 07:29 alexislringler

Air from a workspace enters the air conditioner unit at 30°C dry bulb and 25°C wet bulb temperatures. The air leaves the air conditioner and returns to the space at 25°C dry bulb and 6.5°C dew point temperature (ϕ2≠100%). If there is any, the condensate leaves the air conditioner at the same temperature of the air leaving the cooling coils (i. e., different from our previous assumption that condensate has same temperature of the cooling coils). The volume flow rate of the air returned to the workspace is 1000 m3 /min (Rair=0.287 kJ/kg∙K). Atmospheric pressure is 101.325 kPa. Compute

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

Answer

Engineering, 04.07.2019 19:20

Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.

Answers: 1

Answer

Engineering, 06.07.2019 04:10

Areheat rankine cycle operates with water as the working fluid. steam enters the first turbine at 8 mpa and 450°c and exits at 0.8 mpa. it is then reheated to 400°c before entering the second turbine, where it exits at 10 kpa. if the amount of work into the pump is 8.04 kj/kg and the net work per cycle produced is 1410.25 kj/kg, determine the thermal efficiency of the cycle.

Answers: 3

Answer

Engineering, 06.07.2019 04:10

Steam enters a converging-diverging nozzle at 1.0 mpa and 500°c with a negligible velocity at a mass flow rate of 2.5 kg/s, and it exits at a pressure of 200 kpa. assuming the flow through the nozzle to be isentropic, determine: the exit area and (a) (b) the exit mach number

Answers: 2

Answer

You know the right answer?

Air from a workspace enters the air conditioner unit at 30°C dry bulb and 25°C wet bulb temperatures...

Questions