A long, cylindrical, electrical heating element of diameter D = 12 mm, thermal conductivity k = 240 W/m ⋅ K, density rho = 2700 kg/m3 , and specific heat cp = 900 J/kg ⋅ K is installed in a duct for which air moves in cross flow over the heater at a temperature and velocity of 30°C and 8 m/s, respectively. (a) Neglecting radiation, estimate the steady‐state surface temperature when, per unit length of the heater, electrical energy is being dissipated at a rate of 1000 W/m. (b) If the heater is activated from an initial temperature of 30°C, e