In the following order, list the letter choice of the definition that goes with the term. 1)Body 2)Fins 3)Launch Lug 4)Recovery Wadding 5)Shock Cord 6)Launch Rail 7)Engine Mount 8)Recovery System.

https://lh4.googleusercontent. com/gYs2J7S_u1TKmePACKjcDtgUBxvxo6i AHZNYC3Dpo8SoSbCKtIC9DOql4Px36-QvN6 QjyZyWy03d8MsyiS8DRAYWYP1hk_z0r38AX z1bSgiMRupH_c0CyApHk-FW=w740

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

What precautions should you take to prevent injuries when dealing with heavy loads?

Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.