Engineering, 05.05.2020 17:08 Daseanjones3063

Air
flows through a rectangular section Venturi channel . The width of the channel is 0.06 m; The
height at the inlet (1) and outlet (4) is 0.04 m. The height (3) in
the Bosphorus is 0.02 m. Compressibility and viscous effects can
be ignored (ρwater = 1000 kg / m3
, ρ air = 1.23 kg / m3)
a) Calculate the flow rate if the
water in the small tube connected to the static pressure tap in the throat is drawn as 0.10 m as shown?
b)Calculate the height (h2) in section (2) according to the flow rate you find in part a .
c)Calculate the pressure at the inlet (1) for the fluid to flow ( according to the values you find in a and b )?

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

Answer

You know the right answer?

Air
flows through a rectangular section Venturi channel . The width of the channel is 0.06 m;...

Questions