Engineering, 05.05.2020 17:05 taekookie01
A specimen of a 4340 steel alloy with a plane strain fracture toughness of 54.8 MPa1m (50 ksi1in.) is exposed to a stress of 1030 MPa (150,000 psi). Will this specimen experience fracture if the largest
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 19:20
Afan that can provide air speeds up to 60 m/s is to be used in a low-speed wind tunnel with atmospheric air at 35 c. if one wishes to use the wind tunnel to study flat-plate boundary layer behavior up to reynolds numbes of re 10, what is the minimum plate length that should be used? at what distance from the leading edge would transition occur if the critical reynolds nurnber were rer,e = 5 × 105?
Answers: 2
You know the right answer?
A specimen of a 4340 steel alloy with a plane strain fracture toughness of 54.8 MPa1m (50 ksi1in.) i...
Questions
Mathematics, 16.03.2020 17:34
Social Studies, 16.03.2020 17:35
Health, 16.03.2020 17:35
