Engineering, 05.05.2020 19:58 vixen0528ow6mza

Diffusion of Ammonia in an Aqueous Solution Ammonia (A)-water (B) solution ta 278 K and 4 mm thick is in contact with an organic liquid at this interface. The concentration of ammonia in the organic phase is held constant and is such that the equilibrium concentration of ammonia at the interface is 2.0 wt% ammonia (density of aqueous solution is 991.7 Kg/m) The concentration of ammonia in water 4 mm away is 10 wt% (density of solution is 961.7 Kg/m). Water and the organic phase are insoluble in each other. The diffusion coefficient of NH3 in water is 1.24 × 10-9 m2/s.

(a) At steady state, calculate Na in Kmol/m-s

(b) Calculate NB. Explain.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.

Answers: 3

Answer

You know the right answer?

Diffusion of Ammonia in an Aqueous Solution Ammonia (A)-water (B) solution ta 278 K and 4 mm thick i...

Questions