Engineering, 06.05.2020 05:04 mrsjenrucker

In Example 29.4 (solved in lecture class), the welder works alone, performing not only the welding but also loading and unloading the parts. Suppose a fitter is used in the work cycle to load the starting parts and unload the weldment, and a two-position fixture is installed so that the welder and fitter can work simultaneously. The fixture is designed to index (rotate) between the two positions at the end of each work cycle; indexing time = 0.15 min. The fitter performs the work handling elements, and the welder performs all elements related to welding and changing electrodes. Determine the (a) work cycle time and (b) the arc-on time as a fraction of the work cycle time. If the welder and fitter take 30 min of rest breaks during the 8-hr work shift, (c) how many weldments are produced during the shift, and (d) what is the arc-on time as a fraction of the 8-hr shift?

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m

Answers: 1

Answer

You know the right answer?

In Example 29.4 (solved in lecture class), the welder works alone, performing not only the welding b...

Questions