Engineering, 06.05.2020 05:02 noemir42

A vertical piston-cylinder assembly contains argon. The piston has a mass of mass 25 kg and a face area of 0.005 m2. The mass of argon is 2.5 g, and initially the argon occupies a volume of 2.5 liters. The atmosphere exerts a pressure of 100 kPa on the top of the piston. During a process, the volume of the argon slowly decreases to 0.001 m3 as energy with a magnitude of 1 kJ is slowly removed by heat transfer. Determine the change in the specific internal energy of the argon, in kJ/kg, for this process. Assume the following:

a. g = 9.81 m/s^2
b. friction between the piston and the cylinder wall is negligible.
c. the change in the potential energy of the argon is negligible.
d. the change in the kinetic energy of the argon is negligible.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

Answer

You know the right answer?

A vertical piston-cylinder assembly contains argon. The piston has a mass of mass 25 kg and a face a...

Questions