subject
Engineering, 06.05.2020 06:35 firstone04kr

Develop a spreadsheet using the Modified Puls method to route runoff through the specified pond configuration: Storage - At a stage of 0 ft (brim full), the pond has an area of 1 acre. From a stage of 0 ft to a stage of 3 ft, the pond increases to an area of1.5 acres. From a stage of 3 to 5 ft, the pond increases to an area of 2.25 acres. The stage should not increase above 5 ft Hint: develop an equation for this stage-area relationship for use in spreadsheet Hint: After areas are calculated for each stage, they must be converted to storage iven, see attached spreadsheet The pond has an outlet structure with a 6 inch orifice with the invert set at a stage of 0 The pond has a weir set at a stage of 2 that is 6 feet long Change int5 min Deliverables a) Draw a cross section of the pond showing the changes in pond size as the stage increases. Include a cross section of the outlet structure showing the two outlets set at the correct stage b) Develop a stage / storage relationship for the pond from a stage of 0 to 5 ft. c) Develop a stage / discharge relationship for the pond from a stage of 0 to 5 ft d) Develop a graph showing the relationship between outflow and 2S*/dt + O+ e) Use the attached table as a guide to route the given inflow hydrograph through the system (note, continue the routing until outflow stops or recedes to a very lovw eve f) Graph the inflow and outflow hydrographs on top of one another *provide items b, c, d, e and f as tables or graphs as appropriate

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80Ā° f and a wet bulb temperature of 60Ā° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 18:20
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
question
Engineering, 04.07.2019 19:10
Plan an experiment to measure the surface tension of a liquid similar to water. if necessary, review the ncfmf video surface tension for ideas. which method would be most suitable for use in an undergraduate laboratory? what experimental precision could be expected?
Answers: 2
You know the right answer?
Develop a spreadsheet using the Modified Puls method to route runoff through the specified pond conf...
Questions
question
Mathematics, 02.12.2021 17:30
question
Physics, 02.12.2021 17:30
question
Mathematics, 02.12.2021 17:30
Questions on the website: 13722360