Engineering, 06.05.2020 07:00 shira35
A spherical balloon to be used in hydrogen is tested by towing a 3:1 model in a wind tunnel (the 3:1 ration means that the model is bigger than the prototype). When the model is 1.0 m in diameter and it is in airflow at a speed of 7.8 m/s, its drag coefficient is measured to be 0.4. This drag coefficient includes LaTeX: \frac{1}{2}\rho V^21 2 rho V 2 in its definition. What is the drag force on the prototype balloon in N? The density and viscosity of hydrogen are 0.09 kg/m3 and 9x10-6 Pa. s, respectively. The density and viscosity of air are 1.2 kg/m3 and 1.8x10-5 Pa. s, respectively.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 18:10
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
Engineering, 04.07.2019 19:10
Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?
Answers: 3
You know the right answer?
A spherical balloon to be used in hydrogen is tested by towing a 3:1 model in a wind tunnel (the 3:1...
Questions
Social Studies, 30.10.2020 16:30
Arts, 30.10.2020 16:30
