Engineering, 06.05.2020 08:29 ddddre4460

An ideal-gas mixture with 20 kmol of oxygen, 75 kmol of nitrogen and 5 kmol of carbon dioxide enters an adiabatic turbine at 1.4 MPa and 600 K steadily. The mixture is then expanded to a pressure of 100 kPa. If the isentropic efficiency of the turbine is 85%. Determine:

a. The actual work output of the turbine per unit mass of the mixture, in kJ/kg.
b. The specific entropy generation during the expansion process, in kJ/kg. K.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency

Answers: 1

Answer

Engineering, 04.07.2019 19:10

For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Determine (a) the maximum thermal efficiency of reversible power cycles operating between a hot reservoir at 1000°c and a cold reservoir at 200°c and (b) the maximum cops for reversible refrigeration and heat pump cycies, respectively, between 28°c and 14°c.

Answers: 1

Answer

Engineering, 06.07.2019 03:20

What is the maximum height from which a mass of 30 kg can fall on to a flange on the lower end of a vertical rod of length 1.0 m and diameter 20 mm, the upper end being rigidly fixed, if the stress in the rod is not to exceed 80 mpa? the tensile modulus of the rod is 200 gpa.

Answers: 3

Answer

You know the right answer?

An ideal-gas mixture with 20 kmol of oxygen, 75 kmol of nitrogen and 5 kmol of carbon dioxide enters...

Questions