subject
Engineering, 25.04.2020 01:02 cwater7

Steam enters a turbine operating at steady state at 500 lbf/in.2, 600°F, and exits as saturated vapor at 2 lbf/in.2. The power developed by the turbine is 2.5×106 Btu/h and the steam flow rate is 15,000 lb/h. Heat transfer occurs at a location on the surface of the turbine where the average temperature is 300°F. Neglecting kinetic and potential energy effects
a. Determine heat transfer rate, in Btu/h.
b. Determine the rate of entropy production, in Btu/h°R.
c. Draw a T-s diagram.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
question
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
You know the right answer?
Steam enters a turbine operating at steady state at 500 lbf/in.2, 600°F, and exits as saturated vapo...
Questions
question
History, 26.09.2019 22:30
question
Mathematics, 26.09.2019 22:30
question
Social Studies, 26.09.2019 22:30
question
Physics, 26.09.2019 22:30
Questions on the website: 13722363