Engineering, 23.04.2020 21:25 lakhanir2013

A board game has 20 squares in a row. You start at square 1 and end at square 20. You cannot move beyond 20. If your move goes beyond 20, you cannot move and you do nothing during the turn. You spin a wheel where the probability of each move is a follows
Move Percent

1 square toward the finish 10
2 squares towards the finish 10
3 squares towards the finish 10
4 squares towards the finish 10
5 squares towards the finish 10
6 squares towards the finish 10
Nothing 10
Move 1 squares back 10
Move 2 squares back 10
Move 3 squares back 10

Draw the markov chain?
What is the chance the game ends prior to the 11th move?
What is the chance the game ends prior to the 21th move?
What is the chance the game ends prior to the 31th move?
What is the chance the game ends prior to the 41th move?
What is the chance the game ends prior to the 100th move?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s

Answers: 2

Answer

You know the right answer?

A board game has 20 squares in a row. You start at square 1 and end at square 20. You cannot move be...

Questions