Engineering, 22.04.2020 22:18 krystinayagel013
Stanley is mixing a gypsum powder with water to create a paste. He plans to use the mixture to create a decorative dome-type ceiling. What process is he likely engaging in?
A plastering
B tilework
C masonry
D hanging drywall
Answers: 2
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
Engineering, 04.07.2019 18:20
Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process
Answers: 1
Engineering, 04.07.2019 19:20
Acommercial grade cubical freezer, 4 m on a side, has a composite wall consisting of an exterior sheet of 5.0-mm thick plain carbon steel (kst= 60.5 w/m k), an intermediate layer of 100-mm thick polyurethane insulation (kins 0.02 w/m k), and an inner sheet of 5.0- mm thick aluminium alloy (kal polyurethane insulation and both metallic sheets are each characterized by a thermal contact resistance of r 2.5 x 104 m2 k/w. (a) what is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 25°c and -5°c, respectively? (b) for power saving purpose, which wall material should be increased/reduced in. thickness in order to reduce 50% of the cooling load found in part (a)? redesign the thickness of the proposed material. 177 w/m-k). adhesive interfaces between the q=575.93 w
Answers: 2
Stanley is mixing a gypsum powder with water to create a paste. He plans to use the mixture to creat...
Chemistry, 19.08.2019 07:00
Mathematics, 19.08.2019 07:00
Geography, 19.08.2019 07:00
Geography, 19.08.2019 07:00
Physics, 19.08.2019 07:00
History, 19.08.2019 07:00
English, 19.08.2019 07:00
Mathematics, 19.08.2019 07:00
Mathematics, 19.08.2019 07:00
History, 19.08.2019 07:00