Engineering, 22.04.2020 04:58 lilsnsbsbs
Two steels are being considered for manufacture of as-forged connecting rods subjected tobending loads. One is AISI 4340 Cr-Mo-Ni steel capable of being heat-treated to a tensilestrength of 260 kpsi. The other is a plain carbon steel AISI 1040 with an attainable Sut of113 kpsi. Each rod is to have a size giving an equivalent diameter de of 0.75 in. Determinethe endurance limit for each material. Is there any advantage to using the alloy steel for thisfatigue application?
Answers: 3
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
Engineering, 04.07.2019 19:10
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
Two steels are being considered for manufacture of as-forged connecting rods subjected tobending loa...
French, 23.06.2021 20:40
Mathematics, 23.06.2021 20:40
Mathematics, 23.06.2021 20:40
History, 23.06.2021 20:40
Mathematics, 23.06.2021 20:40
Mathematics, 23.06.2021 20:40
Mathematics, 23.06.2021 20:40
Mathematics, 23.06.2021 20:40
Mathematics, 23.06.2021 20:40