subject
Engineering, 21.04.2020 22:39 jbismyhusbandbae

A novel gaseous hydrocarbon fuel CxHy is proposed for use in spark-ignition engines. An analysis of a sample of this fuel revealed that its molecular weight is 140 and its molar H/C ratio is 2.0. In order to evaluate some of its properties, the fuel was burned with stoichiometric standard air in a constant pressure, steady-flow reactor. The fuel and air entered the reactor at 25°C, and the products of complete combustion were cooled to 25°C. At the exit condition, water in the products was a liquid. It was measured that the heat given off during the process to the cooling system of the reaction was 47.5 MJ/kg of fuel. a) Determine the fuel formula. b) What does that heat given-off to the cooling system of the reactor represent? c) Determine the lower heating value of the fuel. d) Determine the enthalpy of formation of the fuel at 25°C

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
question
Engineering, 04.07.2019 18:20
Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)
Answers: 3
You know the right answer?
A novel gaseous hydrocarbon fuel CxHy is proposed for use in spark-ignition engines. An analysis of...
Questions
question
Mathematics, 16.07.2019 03:30
Questions on the website: 13722360