Engineering, 21.04.2020 15:55 LoserMcBadface

Water is the working fluid in an ideal Rankine cycle with reheat. Superheated vapor enters the turbine at 12 MPa, 480°C, and the condenser pressure is 8 kPa. Steam expands through the first-stage turbine to 1.2 MPa and then is reheated to 480°C. Assume the pump and each turbine stage has an isentropic efficiency of 85% and 92%, respectively. Determine for the cycle: (a) the rate of heat addition, in kJ per kg of steam entering the first-stage turbine. (b) the thermal efficiency. (c) the rate of heat transfer from the working fluid passing through the condenser to the cooling water, in kJ per kg of steam entering the first-stage turbine. (d) the back work ratio. Understand Rankine cycle To solve the problem, do you: Analyze each component as a control volume at steady state? Analyze each component as a closed system at steady state? Analyze each component as a transient control volume since steam is flowing through it? None of the answers given.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m

Answers: 1

Answer

You know the right answer?

Water is the working fluid in an ideal Rankine cycle with reheat. Superheated vapor enters the turbi...

Questions