Engineering, 21.04.2020 04:19 Zagorodniypolina5

Reproduce Example 4.1 in Mi and Masrur: Consider a planetary gear train based transmission with an engine (carrier) providing 100kW at 2000rpm optimum operating point. The ring gear has 72 teeth and the sun gear has 30 teeth. The final drive ratio is 3.7865, and the wheel radius is 0.283m. (1) For a vehicle speed of 45mph or 20.6m/s, the power demand under heavy acceleration at this speed is 120kW. Find the speed and power for each component, assuming no losses. (2) For a vehicle speed of 70mph, or 32.7m/s, when cruising, the power demand is 70kW. Calculate the speed and power of each component

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Asimple speed reducer is composed of 2 spur gears. the pinion gear has a pitch diameter of 0.75" and 36 teeth while the driven gear has a pitch diameter of 4.0" and 192 teeth. a)-what is the diametral pitch of each gear? b)-if an electric motor rotating ccw at 3000 rpm is coupled to the pinion, what is the rotational speed of the driven gear? c)-if the torque delivered to the pinion is 1 n-m, what is the torque on the driven gear? d)-what is the power transmitted by the gear train?

Answers: 1

Answer

Engineering, 06.07.2019 02:30

A75mm diameter shaft is supported in a journal bearing 75mm long with a diametral clearance of 0. 1mm. it supports a radial load of 1000 n and is lubricated with sae 50 oil at 70°c. find the friction torque and the power loss when the crankshaft rotates at 2900 rev/min.

Answers: 1

Answer

Engineering, 06.07.2019 04:20

Consider the transfer function for a first-order system g(s)=12(s+7)/(s^2+2s+9) for this system determine: a) poles and zeros of the function, b) the natural frequency and damping ratio, c) the peak value achieved in response to a unit step input, d) the peak time for a unit step input, e) the steady-state system response to a unit step input

Answers: 2

Answer

You know the right answer?

Reproduce Example 4.1 in Mi and Masrur: Consider a planetary gear train based transmission with an e...

Questions