Engineering, 20.04.2020 22:24 george6871

Create two-pole system transfer functions designed to meet the requirements indicated in each part below.

(a) Assume a sample period of T 0.02 seconds, a DC gain of 1, a zero at the origin, a percent overshoot of 20% or less, and a 1% settling time of 0.5 seconds or less.
(b) Assume a sample period ofT 0.02 seconds, a DC gain of 1, a zero at the origin, a percent overshoot of 10% or less, and a peak time of 0.2 seconds or less.
(c) A DC gain of 1, a zero at the origin, a peak time of 6 sample periods or less, and a settling time of 35 sample periods.
(d) Assume a sample period of T 0.05 seconds, a DC gain of 1, a zero at the origin, and a 1% settling time of 0.8 seconds or less.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

Answer

You know the right answer?

Create two-pole system transfer functions designed to meet the requirements indicated in each part b...

Questions